Knitty: little purls of wisdom
Spinning Loft
Title
beauty shot

Tangy

I love single-ply lace, and, as a beginning spinner, made it my ambitious mission to come up with a skein of my own. I only had the patience for about 300 yards of the super-thin pink stuff, but it was just the right amount for a lacy Estonian-inspired cowl. And dipping the finished yarn alternately between hot and cold baths during setting made sure it would all stay together.

I spun it on my drop spindle as I unfortunately don't yet have a wheel. There's also something extremely satisfying about making very thin yarn on a drop spindle, and I enjoy the rhythm of it. My drop spindle is very light (18g) so can handle spinning thin singles very well as long as the staple length is long enough, and I spun it so it ended up still soft spun, quite a bit like Malabrigo Lace. It was definitely a learning experience and really resulted in my first usable handspun yarn, and I'm quite proud that it turned out so well. I must say that this project has made me a spinning convert, and I foresee many hand-spun items (and a wheel!) in my future.

If you’re blessed with the patience for extra yardage (or are using a commercial yarn), you may want to add an extra repeat of the Lace Pattern for a cowl that will fit snugly over your head. (See pattern notes.)

Experiment with chopping and changing colors in hand-dyed roving to create a flash of self-striping pattern. If nupps and hand-spun, singly-ply yarn (understandably) scare you, why not add a scattering of beads instead?

The stitch pattern used in the cowl is a classic Estonian pattern called Spruce and Diamond, and “Kuusk” is Estonian for spruce.  It’s pronounced, roughly, “koosk”, but with an alluring Scandinavian spin. 

spacer model: Ashley Knowlton
spacer photos: Patrick Count and Ashley Knowlton


SIZE
One

FINISHED MEASUREMENTS
Circumference: 24 inches
Height: 10 inches (customizable)

spacer

MATERIALS
Fiber

spacer LHogan [100% merino; roving]; color: Cocktails; 4 oz

Finished Yarn:
spacer Wraps per inch: 22
spacer Yardage used: 220 yds
spacer Plies: single
spacer Drafting method: Short Draw

Commercial Yarn Alternative

spacer Malabrigo Lace [100% merino; 470yd/430m per 50g skein]; color: Shocking Pink, #184; 1 skein

Recommended needle size
[always use a needle size that gives you the gauge listed below -- every knitter's gauge is unique]
spacer 24-inch US #7/4.5mm circular needle

gearbox
Spinning Tool: Enid Ashcroft Oak Top Whorl Spindle, 18g

Tools
spacer Stitch markers
spacer Yarn needle

spacer

GAUGE

20 sts/36 rounds = 4 inches in Lace Pattern stitch in the round, after blocking

 

PATTERN NOTES
[Knitty's list of standard abbreviations and techniques can be found here.]

To adjust length, simply work more repeats of the Lace Pattern. Each additional repeat requires about 100yds of yarn, and will add about 4 inches in length.

Nupp: Work (k1, yo, k1, yo, k1) into next st. On the next rnd, you will knit these 5 sts together.

Edging Pattern 1
Worked over a multiple of 20 sts.
Rnd 1: [Ssk, p2, k3, p2, yo, k1, yo, p2, k3, p2, k2tog, k1] to end of rnd.
Rnd 2: [Ssk, p1, k3, p2, yo, k3, yo, p2, k3, p1, k2tog, k1] to end of rnd.
Rnd 3: [Ssk, k3, p2, yo, k5, yo, p2, k3, k2tog, k1] to end of rnd.
Rnd 4: [Ssk, k2, p2, yo, k3, nupp, k3, yo, p2, k2, k2tog, k1] to end of rnd.
Rnd 5: [K3, p2, k4, k5tog, k4, p2, k4] to end of rnd.

Work Lace Pattern:

Lace Pattern
Worked over a multiple of 20 sts.
Rnd 1: [K2, (yo, ssk) twice, k2, nupp, k1, nupp, k2, (k2tog, yo) twice, k3] to end of rnd.
Rnd 2: [K8, k5tog, k1, k5tog, k9] to end of rnd.
Rnd 3: [K1, (yo, ssk) twice, k1, k2tog, yo, k1, nupp, k1, yo, ssk, k1, (k2tog, yo) twice, k2] to end of rnd.
Rnd 4: [K9, k5tog, k10] to end of rnd.
Rnd 5: [K2, yo, ssk, k1, (k2tog, yo) twice, k1, (yo, ssk) twice, k1, k2tog, yo, k3] to end of rnd.
Rnd 6: Knit.
Rnd 7: [K1, yo, ssk, k1, (k2tog, yo) twice, k3, (yo, ssk) twice, k1, k2tog, yo, k2] to end of rnd.
Rnd 8: Knit.
Rnd 9: [K3, (k2tog, yo) twice, k5, (yo, ssk) twice, k4] to end of rnd.
Rnd 10: Knit.
Rnd 11: [K2, (k2tog, yo) twice, k7, (yo, ssk) twice, k3] to end of rnd.
Rnd 12: Knit.
Rnd 13: [K1, (k2tog, yo) twice, k2, k2tog, yo, k1, yo, ssk, k2, (yo, ssk) twice, k2] to end of rnd.
Rnd 14: Knit.
Rnd 15: [(K2tog, yo) twice, k2, k2tog, yo, k3, yo, ssk, k2, (yo, ssk) twice, k1] to end of rnd.
Rnd 16: Knit.
Rnd 17: [K1, k2tog, yo, k2, (k2tog, yo) twice, k1, (yo, ssk) twice, k2, yo, ssk, k1, nupp] to end of rnd.
Rnd 18: [K19, k5tog] to end of rnd.
Rnd 19: [Nupp, k3, (k2tog, yo) twice, k3, (yo, ssk) twice, k3, nupp, k1] to end of rnd.
Rnd 20: [K5tog, k17, k5tog, k1] to end of rnd.
Rnd 21: [K2, yo, ssk, k1, (k2tog, yo) twice, k1, (yo, ssk) twice, k1, k2tog, yo, k2, nupp] to end of rnd.
Rnd 22: [K19, k5tog] to end of rnd.
Rnd 23: [K1, (yo, ssk) twice, k1, k2tog, yo, k3, yo, ssk, k1, (k2tog, yo) twice, k2] to end of rnd.
Rnd 24: Knit.
Rnd 25: [K2, (yo, ssk) twice, k1, k2tog, yo, k1, yo, ssk, k1, (k2tog, yo) twice, k3] to end of rnd.
Rnd 26: Knit.
Rnd 27: [K3, (yo, ssk) twice, k5, (k2tog, yo) twice, k4] to end of rnd.
Rnd 28: Knit.
Rnd 29: [K4, (yo, ssk) twice, k3, (k2tog, yo) twice, k5] to end of rnd.
Rnd 30: Knit.
Rnd 31: [K1, yo, ssk, k2, (yo, ssk) twice, k1, (k2tog, yo) twice, k2, k2tog, yo, k2] to end of rnd.
Rnd 32: Knit.
Rnd 33: [K2, yo, ssk, k2, yo, ssk, yo,sk2po, yo, k2tog, yo, k2, k2tog, yo, k3] to end of rnd.
Rnd 34: Knit.
Rnd 35: [K1, (yo, ssk) twice, k4, nupp, k4, (k2tog, yo) twice, k2] to end of rnd.
Rnd 36: [K9, k5tog, k10] to end of rnd.

Edging Pattern 2
Worked over a multiple of 20 sts.
Rnd 1: [Ssk, p2, k1, yo, k9, yo, k1, p2, k2tog, k1] to end of rnd.
Rnd 2: [Ssk, p1, k2, p1, yo, k7, yo, p1, k2, p1, k2tog, k1] to end of rnd.
Rnd 3: [Ssk, k2, p2, k1, yo, k5, yo, k1, p2, k2, k2tog, k1] to end of rnd.
Rnd 4: [Ssk, k1, p2, k2, p1, yo, k3, yo, p1, k2, p2, k1, k2tog, k1] to end of rnd.
Rnd 5: [Ssk, p2, k2, p2, (k1, yo) twice, k1, p2, k2, p2, k2tog, k1] to end of rnd.

spacerCharts
The charts for this pattern are very large and fit on a letter-sized page.
Click here and print the resulting page.

DIRECTIONS

spacer
Cowl
CO 120 sts, place marker and join to work in the round, being careful not to twist.

Work Rnds 1-5 of Edging Pattern 1 once, using written or charted instructions as you prefer.

Work Rnds 1-36 of Lace Pattern twice, or as many times as desired, using written or charted instructions as you prefer.

Work Rnds 1-5 of Edging Pattern 2 once, using written or charted instructions as you prefer.

Bind off as follows:
K1, *k1, sl 2 sts back to LH needle and k2tog] until 1 st rem.  Cut yarn and draw through final st.

 

FINISHING
Block cowl, opening up lace pattern and exaggerating scallops for edging. Weave in ends.

spacer
ABOUT THE DESIGNER

designernamespacer Ashley is an American ex-pat who designs, edits, writes, cycles, and knits from a bungalow in a beautiful, sheep-filled corner of Wales. 

Find her on Ravelry as Wonk, or her designer profile here.

spacer