Who says you need to start at the top, the bottom, or even the
side when you knit a sweater?
I guess in food terms, this is like starting with neither the
dessert or salad course, but jumping right to
the entrée,
leaving the other less substantial dishes to
come later. But all the parts of a sweater are there when you need
them.
The front and back are cast on with provisional cast on, then
knit out with mitered corners to the join for
the sleeves. The body of the sweater is knit
out for a few more rows to shape the underarms and to form the
rest of the bottom and the sides. The shoulder
seams are then sewn and the sleeves are knit
from remaining the live stitches in one piece.
Finally the centers of the squares are grafted together, which
makes an invisible join and hides the method
of construction, but if the grafting intimidates
you, feel free to use a 3-needle bind off.
MATERIALS
Yarn
Noro
Silk Garden Lite [45% silk, 45% mohair,
and 10% lambswool; 136yd/124m per 50g skein]; color: #2034; 7[8,
9, 10, 12, 13, 14] skeins
Recommended needle size [always use a needle
size that gives you the gauge
listed below -- every knitter's
gauge is unique]
1
set US #7/4.5mm double-point needles
(for Sizes 1X, 2X, 3X only)
1
16-inch US #7/4.5mm circular needle
1
24-inch US #7/4.5mm circular needle
1
32-inch US #7/4.5mm circular needle (optional – useful
for all sizes, especially recommended
for larger sizes)
Notions
Waste
yarn
10 stitch markers; be sure one is different from the others
Stitch holders (optional; waste yarn may be used instead)
Yarn needle
GAUGE
20 sts/27 rows = 4" in stockinette stitch Note: For this project, the yarn is knit at a looser gauge than is listed
on the ball band. If substituting yarn, choose a yarn with a recommended
ball band gauge of approx. 22 sts = 4 inches.
PATTERN NOTES [Knitty's list of standard abbreviations and techniques can be found here.]
This project uses a provisional cast on. Use your preferred
provisional cast on technique; directions
for one technique may be found here.
Corner Increase Worked on RS: K to marker; st
after marker will be a p st, followed
by another marker. Use right needle to
pick up st which sits below p st on needle;
k this st. Slip marker, p next st, slip
marker. Use left needle to pick up st below the
st you just purled; this will be the
same st you picked up for the first increase.
K this st. 2 sts increased.
Worked on WS: P to marker; st after marker will be a k st, followed
by another marker. Use right needle to pick up st which sits below k
st on needle (this will be the upper strand leading out from behind the
k st); p this st. Slip marker, k next st, slip marker. Use left needle
to pick up st below the st you just knit; this will be the same
st you picked up for the first increase. P this st. 2 sts increased.
DIRECTIONS
FRONT
With shortest circular needle for sizes XS, S, M and L or
double-point needles for sizes 1X, 2X and 3X, CO 118[112, 100,
88, 76, 68, 52] sts using provisional CO technique. Do not join.
Note: When working Set-up Row, do not place unique marker; this
marker will be placed at end of Round 1.
Set-up Row: K57[54, 48, 42, 36, 32, 24],
place marker, p1, place marker, p1, k57[54, 48, 42, 36, 32, 24],
place marker, p1, place marker, p1. Join to begin working in
the round, being careful not to twist.
Round 1: [K to marker, work corner increase, placing marker
after p st and before second increase] four times, placing unique
marker before second increase of last corner increase, to indicate
beginning of round. 126[120, 108, 96, 84, 76, 60] sts.
Increase Round: [K to marker, work corner increase] four times.
Repeat Increase Round once more. K 1
round. 142[136, 124, 112, 100, 92, 76] sts.
Work Increase Round three times.
K 1 round.
Repeat these 4 rounds 8[9, 10, 11, 13,
14, 15] times more, switching to longer needles as required.
358[376, 388, 400, 436, 452, 460] sts.
Sizes M, L, 3X Only:
Work -[-, 1, 2, -, -, 1] more Increase
Round(s). -[-, 396, 416, -, -, 468] sts.
All Sizes:
There are 60[66, 74, 82, 90, 96, 104]
sts in each short section and 117[120, 122, 124, 126, 128,
128] sts in each long section.
Shape Armholes: Next Round: Work in pattern until you
have worked second corner increase of round (at end of short
section), k81[81, 81, 80, 80, 79, 76] (82[82, 82, 81, 81, 80,
77] sts on right needle after marker). Place marker and turn
work; from this point, front will be worked back and
forth in rows.
For size L, next row will be worked without increases. For all
other sizes, work increases.
Next Row [WS]: Work in pattern until you have worked two corners,
p82[82, 82, 81, 81, 80, 77] (83[83, 83, 81, 82, 81, 78] sts on
right needle after marker). Place last 36[39, 41, 44, 46, 49,
52] sts of this section and corner st on one st holder or length
of waste yarn for sleeve, place 60[66, 74, 82, 90, 96, 104] sts
of short sction on another holder for neckline, place corner
st and 36[39, 41, 44, 46, 49, 52] sts of remaining long section
(all sts to newly placed marker) on third holder for other sleeve.
Remove new marker; front will now be worked back and forth over
remaining sts.
Work 8 more rows in pattern, increasing at corners on three
of every four rows as set. 256[262, 270, 272, 284, 288, 290]
sts.
Loosely BO all sts.
Shape Neckline:
Place 60[66, 74, 82, 90, 96, 104] held
sts of neckline on needle and join yarn with RS facing. Next Row [RS]: BO 3[3, 4, 4, 3, 4, 3]
sts, k17[19, 23, 21, 23, 21, 17] (18[20,
24, 26, 30, 33, 40] sts on right needle)
and place all sts just worked on st holder; BO next 18[20,
18, 22, 24, 22, 18] sts, k to end. 21[23, 28, 30, 33, 37, 43]
sts.
Right Shoulder: Row 1 [WS]: BO 3[3, 4, 4, 3, 4, 3] sts,
p to end. Row 2 [RS]: BO 6[7, 8, 9, 7, 7, 7] sts,
k to end. 12[13, 16, 17, 23, 26, 33] sts.
Repeat these two rows 1[1, 1, 1, 2, 2,
3] times more. BO remaining 3[3, 4, 4, 3, 4, 3] sts.
Left Shoulder:
Place held sts of left shoulder on needle
and join yarn at neck edge with WS facing. Row 1 [WS]: BO 6[7, 8, 9, 7, 7, 7] sts,
p to end. Row 2 [RS]: BO 3[3, 4, 4, 3, 4, 3] sts,
k to end.
Repeat these two rows 1[1, 1, 1, 2, 2,
3] times more.
BACK
Work as for Front.
SLEEVES
Sew shoulder seams using backstitch.
Remove front and back held sts of one
armhole from holders and place on needle, join yarn at underarm
with RS facing. 74[80, 84, 90, 94, 100, 106] sts on needle.
Work 6 rows in stockinette st, ending
with a WS row.
Continue in stockinette until sleeve measures 4.5[5, 3, 5, 5.5,
3.5, 2] inches, ending with a WS row.
Note: As written, sleeve measures 18[18.5,
19, 19.5, 20, 21, 21] inches. If longer or shorter sleeve is
desired, work more or less length at this point.
Decrease Row [RS]: K1, k2tog, k to last 3 sts, k2tog, k1.
Work 7[7, 7, 5, 5, 5, 5] rows in pattern.
Repeat these 8[8, 8, 6, 6, 6, 6] rows
10[10, 12, 15, 15, 18, 20] times more, then work Decrease
Row once more. 36[38, 40, 42, 46, 48, 50] sts.
Work 2 more rows in stockinette st, then loosely BO all sts.
FINISHING
Carefully remove waste yarn from sts at center of front and
back, placing resulting live sts on needles. Graft sts of long
sections together.
Sew the following seams using mattress stitch:
Sew side seams. Sew top portion of sleeve
edges to underarm edges, then sew sleeve
seams. See photo above.
Weave in ends and block sweater.
ABOUT THE DESIGNER
Sarah lives in a part of Canada where there
are no months in the year when you can be sure you won’t
need a sweater. She spends an inappropriate amount of time thinking
about knitting, crocheting and yarn.
Her designs have been published in Knitting in the Sun, Knitty,
and Yarn Forward, and she blogs at Parallax
Knitting.